Robot MarketPlace - Spektrum BR6000 6 Channel Bot Receiver

Click here to add your own review or comment for this product.

5/19/2009

Dan Toborowski

Excellent reception and completely unaffected by electronic noise from motors and other electronics.

Receiver is rather large however in comparison to many of the other options out there. The BR6000 is the smallest DSM2 with fail safe however which is required for most events especially if your robot features an active weapon.

5/28/2009

Kick-me

It Works

It works and is cheaper than most other 2.4Ghz recievers out there. I've 4 in bots with little problems (had to repair one because of a Fiasco launch). The 3 channel Spektrums I had to get for pistol grips were more $$$. Kudos to the BR6000 for being ther for bots.

5/28/2009

Mark Lumb

Now got 5 BR6000 receivers and all work a treat in our robots, never had any problems with them execpt a large increase in power consmption from the Rx battery, just a shame Spectrum don't still do the Dx6 Transmitters for them.

11/7/2009

Banksy from Brisbane

BR6000 for airplanes

We have 5 of these for our school RC plane club. We are required to have an RX that has failsafe; to achieve this normally, you need a more expensive rx. The BR works like a treat, no glitching, range seems as good as any other rxs we use. Our main aircraft is an Me-163 which has a delta wing (mixing done on the tx) and there is no issue with the BR6000 flying the delta wing. Ripper!

12/15/2009

Chris Yost

Excellent reciever. We use this specific reciever during 15 lb robobotos competitions and it holds up extremely well. Reception is excellent and we've had no problems at all.

1/4/2010

Troy

Great Reciever

I use this for my antweight, and it works flawlessly. There is no twitching or anything, its perfect. The robot could be downstairs while I control it from upstairs, its so great. Also, the failsafe is a necessary feature, and works very well except that my servo lifter moves to a certain spot then stops when I turn off my DX6. It is a little large though, as it is a very tight fit in my antweight chassis. Overall, the BR6000 is an excellent receiver that performs really well and should be used in all combat robots.