Robot MarketPlace - HG62 Geared Motor 62:1

HG62 Geared Motor 62:1
The HG-series gearmotors are beefy enough for the most demanding 15 pound robots, and possibly even more- yet they won't break your budget! Perfect for directly-attaching your wheels right to the output shaft.

$49.99

Motors
Motors - Geared

Click photo to enlarge.

HG62 Geared Motor 62:1
Part# 0-BHG62

(average customer rating)

$49.99

This Product Has Been Discontinued

Stock Status: Removed

For years, there has been a void in the realm of conveniently-priced gearmotors for the 12-15 pound robot weight class. Look no further! The HG-series gearmotors are beefy enough for the most demanding 15 pound robots, and possibly even more- yet they won't break your budget! Perfct for directly-attaching your wheels right to the ouput shaft. Available in three different gear ratios, so you can choose between a higher speed 20:1, a higher torque 62:1, or a maximum torque 312:1 option.

The gearbox has four face-mount M3 threaded holes. Gearbox is offset-shaft, spur gear type, and is sealed, maintenance-free.

These motors are meant to be run at 12V, but we've tested them to run fine up to 24V.
Please note that the hubs we list below (6mm) will need to be drilled out to 7mm to work with this motor.

	HG62 model
	6V	12V
No load speed	100 rpm	200 rpm
Amps @ nominal	0.5A	0.6A
Stall current	20A	32A
Stall torque	536 oz-in (38.6 kg-cm)	660 oz-in (47.5 kg-cm)
Nominal Voltage	12V (can be run higher)
Gear ratio	62:1
Weight	16.6 oz (470g)
Diameter	1.4" (36mm)
Gearbox Diameter	1 5/8" (42mm) square
Length	4.0" (102mm)
Shaft diameter	7 mm - with flat
Shaft length	15 mm (0.59")

Click on a thumbnail to view full size image.

Dimensions

Back View

Click here to add your own review or comment for this product.

6/4/2012

LorenzoJalbert

HG62 Geared Motor 62:1

I�m a 1/6 scale radio control ww2 vehicles builder and I use this product for my Panzer 2 for the drive system I�m very impress with the torque and the quality so for those reasons I will recommend it.
For more check my youtube adress "innovator56"

4/19/2010

mr. P

gear troubles

First year robot builder. I bought two of these for my 15lb robot. The gear on the motor that goes into the gearbox fell off. Pinned it and the gear shattered. Bought a replacement and flat spotted the gear in the gear box. Stripped the gear out and replaced with other gear from first motor day of competition. Same thing again. One worked perfect through three other problems then was used on another robot with no problems. Way to high of a failure rate for most builders at the competition to ever buy again.

Other products you may be interested in:

Mini Aluminum Hub set of two - 6mm bore

HG20 Geared Motor 20:1

HG312 Geared Motor 312:1