Futaba
T6XAPS PCM System
The
6XAPS 6-Channel PCM1024 Computer Radio Control System from Futaba
is one of the most popular radio control packages for combat robots
and other RC vehicles. Unlike most places you can purchase this
radio, this system is available already converted for use on the
75Mhz ground frequency, so it is 100% legal for use in all weight
classes of BattleBots! It is also available on 72Mhz for model
aircraft.
FEATURES
* PCM 1024 Transmitter with built-in PCM.
* 6-different model memory.
* Pre-programmed for the most commonly used Aileron mixing mode (Single
stick "Tank Steering") for combat robots.
* All-channel servo reversing.
* Dual rates on 2 channels using 2 switches, or on 3 channels using
1 switch
* Exponential on throttle, rudder, aileron and elevator
* Fail safe moves the stick output to a
predetermined position.
* Electronic trim memory that remembers the trim settings of stored
models.
* Switchable and variable rate channel control, with proportional
channel adjusting on the variable rate.
* In addition to the pre-programmed mixes, this radio allows for
up two user-defined programming mixes.
INCLUDES
* T6XAPS PCM Transmitter pre-configured in either 72Mhz (aircraft)
or 75Mhz (ground)
* R138DP Dual Conversion PCM 1024 8-Channel Receiver
* Two S3004 Servos (or 4 if you get the 72Mhz model)
* Preinstalled crystals
* Receiver NiCad battery pack
* Transmitter NiCad battery pack
* Overnight charger
* Accessory Pack
* Switch/Charging harness
* Owner's Manual
* One year factory warranty
Owner's
Manual
Check
this excellent page on
programming this radio for combat robots.
