Robot MarketPlace - RoboteQ ax2860 2-Channel 60V Motor Controller

RoboteQ ax2860 2-Channel 60V Motor Controller
Feature-rich, this 120 Amp, two-channel motor speed controller can handle the most powerful of motors, such as our Ampflow motors.

$720.00

Roboteq's AX2550 controller and its AX2850 variant are designed to convert commands received from a R/C radio, Analog Joystick, wireless modem, or microcomputer into high voltage and high current output for driving one or two DC motors. Designed for maximal ease-of-installation, it is delivered with all necessary cables and hardware and is ready to use in minutes.

Power Stage
Operating Voltage	12V to 60V DC
Number of Channels	2
Max Current: 30s 1min 3min 1hr+	120A 100A 80A 60A
Surge Current	>250A
MOSFETs per Channel	8
ON Resistance	5 mOhm
Synchronous Rectification	Yes - allows regenerative braking
Current Limiting	By automatic power output reduction according to user preset limit and temperature
Temperature Protection	Automated current limit reduction starting at 175F (80C) case temperature
Voltage Protection	Output shut off below 12V and above 43V
Power Wiring	8g wire
Command
R/C Inputs	2 inputs (1.0ms - 1.5 ms center - 2ms, Adjustable)
Serial Interface	RS232, 9600 bauds
Analog Interface	Two inputs (0V - 2.5V center - 5V)
Input Corrections	Ch1 and Ch2 mixing for tank steering. Programmable deadband. Four exponent and Logarithmic command curves
Input/Outputs
Optical Encorder Interface	4 inputs for two incremental encoders; 125kHz max
Analog Inputs	Two inputs, 8-bit resolution
Digital Outputs	One output, 24V 2A max
Digital Inputs	Two general purpose inputs
5V Supply Output	100mA max for encoders, radio or other devices
Operating Modes
Open Loop Speed	Forward and Reverse speed control, seperate or mixed
Closed Loop Speed	Use tachometer on analog inputs or Optical Encoder and PID
Position Mode	Use potentiometer on analog inputs or Optical Encoder and PID
Controller Configuration	Jumper-less. Configuration using built-in switch and LED display or PC utility
Physical
Operating Temperature	-40 to +85C case temperature
Enclosure	Heat-sinking Aluminum Extruded Case
Controller Size	5.5 x 1.6 x 9 in. including mounting brackets
Cables	10 in. RC rable to radio. 4 in. RS232 cable for PC connection
Weight	3.3lbs.