DCW-MAGF75 Ampflow Mount 3/4 inch thick - with heatsink <p align="left"><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">These
are custom-designed for the 3" <a href="ampflow_motors.html">Ampflow Motors</a>,
but will also fit other motors with a 3" diameter housing. These
will fit both the A28-150 or the A28-400 Ampflow Motor.</font></p>
<p align="left"><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Available
with and without the heat-sink fins. The addition of the cooling fins
helps disburse the heat that this motor can produce, allowing your motor
to run more efficiently. </font>
<font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Choose
from 1/2" or 3/4" thick 6061-T6 aluminum (1/2" thickness
shown in these photos). All mounts come with two holes in the base for
1/4" screws, and two bolts are included to attach the top half of
the mount around your motor- couldn't be more simple to install.</font>
<font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">There
are no other mounts made for this motor that are specifically designed
for fast swap-out. Nothing worse that having to break down your entire
robot just to get a motor out, especially during a frantic competition.
With these mounts, 2 bolts from the top of each mount, and you can lift
the motor right out.</font>
<p align="left"><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Weight: 12.96oz</font>
<p align="left"><font color="ffff00" size="2" face="Arial, Helvetica, sans-serif"><strong>Mounts
are sold individually, you may want to use two per motor.</strong></font>
<div align="center"><font color="00ff66"><a href="images/store_magmount_finmountlg.jpg"><img src="images/store_magmount_finmount.jpg" width="288" height="257" border="0"></a><br>
<font size="2" face="Arial, Helvetica, sans-serif">Click photo for large
view</font></font></div>
Dimensions:
|
$62.50 
