Robot MarketPlace - Traxxas 5404 TRX 3.3 Engine, IPS Shaft Without Starter

This is the Traxxas TRX 3.3 Racing Engine without Starter and with IPS (Integrated Pilot Shaft) Crankshaft. This version requires use of a bump starter or starter box and will not accept a pull start or the Traxxas EZ-Start system. For use in all TRX3.3 equipped vehicles. Not for Maxx trucks or other models without flywheel access.

Traxxas TRX Racing Enginers are among the most powerful racing engines available. The TRX 2.5 set the bar and was heralded as "the most powerful smallblock engine we have ever tested" by RC Car Action Magazine. The TRX 3.3 is bigger, faster, and puts out a whopping 60% more peak horsepower compared to the TRX 2.5.

The TRX 3.3 also delivers nearly 50% more total power under the curve. This gives you smooth, linear power output with increased performance and responsiveness across the entire RPM range. The TRX 3.3 is for drivers at the highest skill level who have the experienced reflexes for extreme speed and acceleration. Traxxas builds more car and truck engines than anyone so you can always count on the reliability and support that has been proven in thousands of Traxxas TRX Racing Engine

Features:
-Traxxas TRX 3.3 IPS Shaft 5404
-For use in all Traxxas TRX2.5 and TRX 3.3 equipped vehicles with flywheel access
-60% more peak power than the TRX2.5, with nearly 50% more power under the curve for strong linear acceleration
-One-piece IPS crank provides precise gear mesh and eliminates vibration
-Rear exhaust
-Molded LCP (Liquid Crystal Polymer) body slide valve carburetor with high-volume air filter
-Blue anodized aluminum cooling head with molded head protector

Specifications
-Displacement: .20 cu in (3.3cc)
-Specs such as bore, stroke, RPM and horsepower are not provided, contact Traxxas for further details
-Weight: 9.1oz (257g)
-Distance between mounting holes same side: 0.43" (11mm)
-Distance between mounting holes opposite side: 1.2" (32mm)
-Distance from center of engine to front bearing: 1.2" (32mm)
-Distance/bottom of mounting flanges/top of cylinder head: 3.6" (92mm)
-Distance/ crankcase bottom to top of cylinder head: 44" (105mm)
-Width of mounting flanges: 1.5" (39.5mm)

Contents
-Traxxas TRX 3.3 Racing Engine with IPS crankshaft, air filter, filter oil, setup DVD, illustrated instruction manual and glow plug

Requirements
-Bump starter or starter box of modeler's choice
-Fuel: Car fuel blend with 10-33% nitro content