0-SPDT280 GWS Speed T-280 Motor <p align="left"><font face="Arial, Helvetica, sans-serif" size="2"><font color="00ff66">The
T-280 Ferrite motor is a small, extremly high speed brushed DC motor, great
for a very inexpensive spinning weapon on an antweight. Or, combined
with the right geardown system, it would also make a great drive
motor for smaller robots. </font></font></p>
<p align="left"><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Unlike
the more powerful and faster <a href="motors_brushless.html" target="_top">brushless
motors</a>, this motor can use a standard brushed controller such
as our <a href="0-CSEP7P.html">Pixie-7P</a>.</font></p>
<p align="left"><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Operating
Voltage: 7.2-11.1V<br>
Weight: 1.41 oz<br>
No Load speed: 18,900rpm @ 7.2V<br>
Load speed:
13,900rpm @ 7.2V <br>
approx 5amps max<br>
Diameter: 24mm<br>
Length: 30mm<br>
Shaft: 2.3mm diameter<br>
Solder Terminals, prewired with a small, 2-pin connector (see alternate photos)<br>
Bronze bushings <br>
Buillt-in capacitors</font></p>
<p align="left"><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">We
recommend using the <a href="0-CSEP7P.html">Pixie-7P
speed controller</a> for this motor, or the AUX channel of your small robot speed controller.</a> </font></p>