Robot MarketPlace - Multiplex Easy Star RR ARF 54in.

The Easy Star was designed for first time pilots in mind, and offers incredibly stable flight characteristics and durability. Powered by a powerful Speed 400 motor mounted on the top so hard landings won't break the prop or hurt the motor. The Easy Star flies with little input and has the ability to recover easily. Made from Multiplex's durable "Elapor" foam, the Easy Star will take a tremendous amount of abuse without breaking. When it does break it's easily repaired with CA (super) glue. Even after many crashes, the Easy Star will be ready for more. This is a great plane to teach someone to fly where other trainers would be ready for the trash can!

Features
Construction: Elapor foam on the fuselage, wing and tail section
Wings: two-piece, foam construction
Radio compartment: Easily accessible under wing
Landing gear: No landing gear,model lands on its belly
Hardware: Pushrods and other hardware included
Motor Mount: Molded into the foam fuselage
Servos: Two micro size preinstalled with universal connectors for rudder and elevator control
400 size Permax motor with high current socket and lead
5" diameter pusher prop with black spinner (prop faces the rear of the airplane)
Electronic speed control, motor w/prop, and servos w/pushrods are all preinstalled

Specs
Wingspan: 54" (1370mm)
Wing Area: 372 sq in (24 sq dm)
Weight: 24oz. (680 g)
Total Length: 34" (870mm)
Wing Loading: 10.72 oz/sq. ft.
Center of Gravity: 3.07" (78mm) Back from the wing's leading edge at the fuselage sides.
Control Throws: Elevator: Up & Down 3/16" (5mm); Rudder: Right & Left 3/8" (10mm)

Includes
Foam fuselage
Wings and tail section
400 size motor (direct drive) with connector and lead (must be soldered to motor)
Prop
Spinner
Multisont X16 8A Brushed ESC
Tiny-S Servo x2
Hardware package
Decals
Illustrated instructions

Needed to Complete
3-channel radio with micro receiver
6 or 7 cell battery from 500 to 1500mAh with the proper connector
Charger for the battery with proper connector

NOTE: This model is NOT made from polystyrene foam. For this reason, it is not possible to use white glue or epoxy glue. Use only a medium CA (CA+) glue and activator. Do not use CA glue designed for polysty- rene foam.