0-MPUA2192 Multiplex Easy Star Kit 54in. <p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">The Easy Star was designed for first time pilots in mind, and offers incredibly stable flight characteristics and durability. Powered by a powerful Speed 400 motor mounted on the top so hard landings won't break the prop or hurt the motor. The Easy Star flies with little input and has the ability to recover easily. Made from Multiplex's durable &quot;Elapor&quot; foam, the Easy Star will take a tremendous amount of abuse without breaking. When it does break it's easily repaired with CA (super) glue. Even after many crashes, the Easy Star will be ready for more. This is a great plane to teach someone to fly where other trainers would be ready for the trash can!</font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Features</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br>
Construction: Elapor foam on the fuselage, wing and tail section<br>
Wings: two-piece, foam construction<br>
Radio compartment: Foam<br>
Landing gear: No landing gear,model lands on its belly<br>
Hardware: Pushrods and other hardware included<br>
Motor Mount: Molded into the foam fuselage<br>
400 size Permax motor with high current socket and lead<br>
5" diameter pusher prop with black spinner (prop faces the rear of the airplane)<br>
Colorful Easy Star logo decals (must be cut out and applied)<br>
Ready to fly in two to six hours</font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Specs</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br>
Wingspan: 54" (1370mm)<br>
Wing Area: 372 sq in (24 sq dm)<br>
Weight: 24oz. (680 g)<br>
Fuselage Length: 34" (870mm)<br>
Airfoil: Flat bottom, high wing<br>
Center of Gravity: 3.07" (78mm) Back from the wing's leading edge at the fuselage sides.<br>
Control Throws: Elevator: Up & Down 3/16" (5mm); Rudder: Right & Left 3/8" (10mm)</font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Includes</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br>
Foam fuselage<br>
Wings and tail section<br>
400 size motor (direct drive) with connector and lead (must be soldered to motor)<br>
Prop<br>
Spinner<br>
Hardware package<br>
Decals<br>
Illustrated instructions</font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Needed to Complete</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br>
3-channel radio (throttle, rudder, and elevator control) with 2 micro servos<br>
12 amp speed control<br>
6 or 7 cell battery from 500 to 1500mAh with the proper connector<br>
Charger for the battery with proper connector</font></p>
<p><font color="ff0000" size="2" face="Arial, Helvetica, sans-serif">NOTE:</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"> This model is NOT made from polystyrene foam. For this reason, it is
not possible to use white glue or epoxy glue. Use only a medium CA
(CA+) glue and activator. Do not use CA glue designed for polysty-
rene foam.
</font></p>