This is the radio controlled, electric powered, foam construction GWS-262 Airplane Kit with no power system.
For Advanced Pilots.
Features:
Construction: White colored foam wing and tail sections with two-piece fuselage
Wings: One piece, foam construction
Radio Component Placement: Accessible over wing
Landing Gear: 0.08" (2mm) diameter prebent main and tail wire prebent wire
Wheels: Foam, two 2" (51mm) diameter main, 1.75" (38mm) tail-ultra lightweight design
Hardware: Included
Aileron Control: Dual servo
Includes: Foam wing and tail sections, 2mm diameter wire landing gear, three ultra light wheels, clear plastic nose cone, decals, epoxy, two-piece fuselage, power Y-harness, hardware and instruction manual
Requires:
Speed Control: Two ICS400/F or 15A equivalent
Power System: Two GWEDF064A EDF64 with 300H motor (2540X6)
or GWS262 EDF64 Duct Fan & BLM005A Motor Set
Battery: 8N 9.6V 1600mAh NiMH or 7.4-11.1V 2S1P OR 3S1P 1300-2200 LiPo
Charger: Timed or peak for type of battery selected
Radio: 3-4 channel with four micro servos (1-elevator, 1-rudder, 2-aileron)
Y-Harness: One for aileron servos
Building and field equipment
Specs:
Wingspan: 41.34" (1050mm)
Wing Area: 263.5 sq in (17 sq dm)
Weight: 24.7 - 27.9 oz (700 - 790 g)
Wing Loading: 13.5 - 15.3 oz/sq.ft (41.2 - 46.5 g/sq.dm)
Length: 33.6" (853mm)
Airfoil: Flat bottom, low wing placement
Center of Gravity: 3.1" (80mm) behind leading edge of wing
Control Throws: Elevator: Up & Down 30-35¡; Aileron: Up & Down 30-30¡