Robot MarketPlace - E-flite P-40 Warhawk 300 ARF

E-flite P-40 Warhawk 300 ARF
A thrilling re-creation of the Flying Tigers' legendary fighter plane that goes together fast and is perfectly sized for flying in the park.

$99.99

On paper, the P-40 was outclassed by many of the foes it faced. But in the hands of the pilots of the American Volunteer Group, the Warhawk was used to deadly effect against "superior" Zeros. Their exploits made the iconic shark-toothed grin of the "Flying Tigers" a symbol of victory for the Allies and cause for concern to any enemy pilot that encountered it.

E-flite has captured the spirit of the Flying Tigers in this fun-to-fly re-creation of the P-40 that goes together fast and is small enough to fly in the park. It comes out of the box loaded with scale details like an authentic Flying Tigers paint scheme and molded panel lines. It also comes equipped with a factory-installed 300 BL outrunner motor that will provide plenty of power for warbird aerobatics like loops, rolls and Immelmans. Its simple 3-channel control setup means you only need to buy two servos - one for aileron and one for elevator - making it even more affordable to get flying. When you're not flying, you can show off its scale looks with the included static display stand.

Features
Molded foam construction with panel lines and other scale details
Factory-applied Flying Tigers "shark mouth" paint scheme
Factory-installed 300 BL outrunner motor with propeller
Factory-installed empennage, control horns and servo links
Simple aileron/elevator controls require just two servos
Quick release wing attachment
Magnetically secured canopy hatch
Extra prop and spinner included
Quick, easy assembly
Attractive display stand included

Wingspan:	25.6 in (650mm)
Overall Length:	21.7 in (550mm)
Wing Area:	108 sq in (7.02 sq dm)
Flying Weight:	Without battery: 5.5–6.0 oz (156–170 g) with battery: 6.5–7.0 oz (184–198 g)
Motor Size:	300 Brushless (Included)
Radio:	4+ channels
Servos:	E-flite S-60
CG (center of gravity):	1 1/8 to 1 1/4 inches (28–35mm) back from the leading edge
Prop Size:	7 x 6 (included)
Spinner Size:	(Included)
Hardware Included:	(Yes)
Speed Control :	E-flite 10-amp brushless (required)
Recommended Battery:	2S LiPo (EFLB4302SJ)
Control Throw (Ailerons):	HIGH: Up & Down 5/16-inch (8mm), LOW: Up & Down 1/4-inch (6mm)
Control Throw (Elevator):	HIGH: Up & Down 3/16-inch (5mm), LOW: Up & Down 5/32-inch (4mm)
Scale:	Warbird
Approx. Assembly Time:	3-5 hours
Minimum Age Recommendation:	14 years
Experience Level:	Intermediate
Recommended Environment:	Outdoor
Is Assembly Required:	Yes

Needed to Complete
You will need a minimum 4-channel transmitter, receiver, two servos, ESC, battery and charger.