Robot MarketPlace - Bantam E-Station BC6HP DC Charger with EAC124 Adapter Board

Bantam E-Station BC6HP DC Charger with EAC124 Adapter Board
BC6HP employs a high powered circuit that has maximum output power of 250Watts. It can charge or discharge up to 18 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 10A.

$129.99

Each BC6HP includes one Bantam E-Station CSRC/Align/E-Flite Style Balancing Adapter Board. Be sure to select an additional adapter board if needed so you can take advantage of this charger’s balancing function.

Operating software
Every operating program in the unit is controlled with mutual links and communications to prevent every possible error. Maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error, ect are a built-in safety features. The entire firmware can be upgraded via USB from internet download at our web page, when available. The optional USB Link Module and Cable Kit is required.

High Power and High Performance Circuit
BC6HP employs a high powered circuit that has maximum output power of 250Watts. As a result, it can charge or discharge up to 18 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 10A. Furthermore, the cooling system is so efficient that can hold power without any trouble of over heating the circuit or the operating program.

Individual voltage balancer for Lithium batteries
BC6HP has an individual cell voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing.

Accept various types of Lithium battery
BC6HP can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section.

Lithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage' mode controls the final voltage of the battery to be suit for long time storage.

Maximum safety
Delta-peak sensitivity: The automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH)
Auto-charge current limit: When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.
Capacity limit: The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.
Processing time limit: You can also restrain the maximum processing time to prevent from any possible over charge.
Input power monitor: To protect the car battery using as input power from being damaged, its voltage always being monitored. If it drops below the lower limit the process will be ended automatically.
Automatic cooling fan: The electric cooling fan comes into action automatically only when the internal temperature of the unit is raised.

Data store/load
For convenience, The BC6HP can store maximum 10 data of different batteries. You can set the selected program of the battery to charge or discharge. This data can be recalled at any time you require.

PC based analysis using USB communication
For advanced users, the BC-6 offers an optional FREE PC-based program that can analyze your battery via a USB connection. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in your pack. The USB Module and Cable Kit is required.

Specs
Input Voltage	11V-18V DC
Idling Current	Approx. 100mA
Charge/Discharge Power	Max 250/25W
Number of LiPo/LiIon/LiFe Cells	1-6 cells
Number of NiCad/NiMH Cells	1-15 cells
Pb Battery Voltage	2-24V
Charge Current	0.1 - 10.0 amps
Discharge Current	0.1 - 7.0 amps
Number of Cycles	1 - 5 times
Battery Data Memory	Up to 10 data
Weight	580g
Dimension	140 x 120 x 40 mm