0-AGNKX0160NPN T-REX 600 Nitro 3G Flybarless Heli Kit <p><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Align's T-Rex 600 Nitro with 3G Programmable Flybarless System features bump resistant fiberglass painted canopy. The canopy also features a rigid easy clip on/off design for fast installation and removal. Simple and lightweight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight. +/-15° collective pitch is possible for extreme 3D performance. Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM. Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG. Pitch and all servos moved forward for CG. Battery tray designed for easy and clean radio gear installation. Fuel Tank Capacity is 440cc and runs for about 10 minutes 3D flying. Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower. Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight. Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption. </font></p>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Features</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br />
95mm Tail Blades<br />
Highly efficient shaft driven tail design<br />
Rigid frame design that can also handle hard crashes without damage<br />
Carbon Fiber frames, fins and boom supports<br />
Heavy duty tail with thrust bearings<br />
Main Gear Radio 8.5:1, 1500-2200 Rotor RPM<br />
Ready to fly weight (no fuel) is an incredible 3.10kg<br />
Fuel Tank designed so that no additional header tank is required<br />
Main gear with one-way bearing design for high torque<br />
3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance<br />
12 bit processors providing ultra high resolution, resulting in highly precise controls</font></p>
<table width="100%" border="1" cellspacing="0" cellpadding="0">
<tr>
<td colspan="2"><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Specs</font></td>
</tr>
<tr>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Type</font></td>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Nitro Heli Kit </font></td>
</tr>
<tr>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Main Rotor Diameter </font></td>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">53.1in. (1350mm) </font></td>
</tr>
<tr>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Tail Rotor Diameter </font></td>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">9.45in. (240mm) </font></td>
</tr>
<tr>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Gross Weight </font></td>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">6.83lb (3100g) </font></td>
</tr>
<tr>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Length</font></td>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">45.7in. (1160mm) </font></td>
</tr>
<tr>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Kit/ARF/RTF</font></td>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Kit</font></td>
</tr>
<tr>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">Rotor Blade Length </font></td>
<td><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif">23.6in. (600mm) </font></td>
</tr>
</table>
<p><font color="cccccc" size="2" face="Arial, Helvetica, sans-serif">Needed to Complete</font><font color="00ff66" size="2" face="Arial, Helvetica, sans-serif"><br />
Transmitter (7-channel or more, helicopter system)<br />
Receiver (7-channel or more)<br />
Standard servo x1 (for throttle)<br />
Align 50 engine x1<br />
50 Muffler x1<br />
Pitch gauge x1<br />
Super starter x1<br />
Engine fuel x1<br />
Fuel pump x1 </font></p>